Nunchaku pure copper/stainless steel new kerosene lighter

IHow to operate correct inflation

  1.Before inflation, use a small tool to hold the inflation core, completely discharge the residual gas in it, so as to eliminate the pressure in the air tank of the lighter;

  2.Press the outlet of the gas tank vertically downward5undefined

  3.Please wait a moment after inflation 3-5It can only be used for about minutes, such as5If there is still no fire after minutes, please turn up the adjusting valve. (Note+  -）Direction.

For more details, please see the following detailed introduction.

Special reminder: altitude1000In plateau areas above meters, the use of inflatable windbreaks and direct lighters has an impact. The ignition rate drops by a large proportion, so please carefully select the windproof direct impact lighter. Try to use open flame and kerosene lighter.

IIInstructions for using kerosene lighters:

Note: The new kerosene lighter does not contain oil and must be refueled. Available in our shop, in the kerosene column of accessories.

Refueling step:

1. Open the machine cover;

2. Pull out the movement;

undefined

4. Oil filling is completed and inserted into the casing, which can be used.

5. Pay attention to the fact that it can only be filled to 8% full, and do not overflow too much. Please pay attention to safety when firing for the first time, because there may be spilled oil which may cause the whole fuselage to catch fire.

      In particular, the distributor should not refuel kerosene lighters before they are sold and not used. First of all, after refueling and burning, the cotton core will turn black and become the same as that of the old machine, which cannot be accepted by guests. In addition, if it is not used after refueling, the ignition rate will decrease and it will not be able to strike a light in the future.

    Important, it is a common and normal phenomenon that there is rust inside the casing, which is caused by the residual chemical agent during surface processing. At the same time, in daily use, we often plug and pull friction. At the same time, the rougher the internal structure, the better the fastening of the movement, and it will not be too loose. Therefore, we don't deliberately beautify the interior of the movement. If the movement is loose in use, please pull out the movement and gently tap the bottom of the movement side. Just load it again.

3、 Charging lighter

At present, there are two types of charging lighters on the market: electric hot wire lighters and arc pulse lighters

1. The charging time of the charging lighter is about 2 hours. Generally, the lighter is charged through the USB cable interface. It can be charged through the universal mobile phone charging plug, car charger and computer USB port. Some of the lighters also have their own USB direct connector for direct charging.

2. Generally, about 2-3 bags can be ordered. It is easy, convenient and fast to charge after the power is used up.